QPG6095

    Zigbee® / Thread / Bluetooth® Low Energy Smart Home Communications Controller

    关键性能

    • Operates in the worldwide 2.4 GHz ISM-band
    • Integrated baluns and RF filters
    • Support for external LNA and/or PA
    • IEEE 802.15.4 compliant PHY and Real-Time MAC
      • Preamble-based antenna diversity
      • Packet-in-Packet resynchronization
      • Multi-Stack / Multi-Channel support, operating in up to 3 PANs on different channels
    • Bluetooth v 5.0 compliant LE Controller 3
      • High Date Rate (2 Mbits/s)
    • HW-accelerated Dynamic Multi-Protocol support
    • HW-accelerated AES and CCM* encryption with 128, 192 and 256-bit keys
    • Arm Cortex-M4 processor with DSP functionality
    • 512 Kbyte Flash Program memory; allows OTA software upgrade
    • 64 Kbyte Low Leakage Retention RAM
    • Full internal IO pull-up / pull-down support during active and standby states
    • Fast and low-power analog measurements

    The Qorvo QPG6095 (formerly GP695) Zigbee® / Thread / Bluetooth® Low Energy Smart Home Communications Controller provides a fully integrated solution for ultra-low power wireless communications for Smart Home sentroller devices such as thermostats, motion sensors, smart plugs, key pads and door/window sensors. It is compliant with the IEEE Standard 802.15.4 for Zigbee® and Thread, and the Bluetooth® Core Specification version 5.0 for Bluetooth Low Energy, providing robust spread spectrum data communication with a highly secure encrypted and authenticated data flow. For Zigbee® communications, antenna diversity offers additional robustness in a crowded wireless 2.4 GHz environment.

    The QPG6095 features a radio transceiver, integrated real-time Medium Access Control and Bluetooth® Low Energy Controller, integrated Arm® Cortex®‑M4 microcontroller, RAM and Flash memory, security engine, event scheduler, and an extensive set of peripherals including analog signal monitors and comparators. The QPG6095 integrated RF baluns and filters reduce the product’s RF design complexity enabling very low cost single layer applications using simple PCB antennas requiring no shielding and a minimum number of external components. The Flash memory allows for software upgrade over the air.

    The QPG6095 is capable of running the full stack and applications for Zigbee® 3.0, Thread and Bluetooth® Low Energy devices, including the OpenThread open-source implementation of the Thread networking protocols.  Integrated multistack, multi-protocol support enables stacks to operate concurrently, and on different channels, enabling innovative new applications combining Zigbee®, Thread® and Bluetooth® Low Energy in one product.

    The powerful QPG6095 Development Kit enables complete product emulation; it has successfully passed Zigbee® 3.0  Color Dimmable Light and Door/Window sensor Combined Interface product certifications. OpenThread running on the QPG6095 has passed Thread specification compliance and interoperability testing. These certifications reduce risk of implementation and time to market for products integrating the QPG6095. Please view the SDK Product Brief for a complete listing of certification documents (page 4).

    Advanced power management features ensure that power consumption is minimized in active as well as in standby states, enabling maintenance free and very small form factor products. For lower power consumption the integrated DC/DC Buck converter can be used together with a few external components. Alternatively, the internal regulator can be used instead of the integrated DC/DC converter, to minimize the bill of material.

    特别应用

      • Lighting applications (Connected Light Bulbs and Connected Light Switch)
      • Smart home sensors and actuators (such as Thermostats, door/window contact, smart plugs etc.)
    应用 Smart Home Devices
    协议 802.15.4, Zigbee 3.0, Zigbee Green Power, Thread, Bluetooth® Low Energy
    ConcurrentConnect Technologies Multi-Channel, Antenna Diversity
    Max Tx Power(dBm) 10
    Rx Sensitivity(dBm) -100 (802.15.4), -97 (BLE @ 1Mbps)
    Tx 电流(mA) 23.6 @ 10 dBm
    Rx 电流(mA) 4.0 (802.15.4), 8.3 (BLE)
    Sleep Current(uA) 1.1 to 1.2
    MCU Arm Cortex-M4 with DSP
    NVM Size(kB) 512
    RAM Size(kB) 64
    Security Hardware Accelerated Encryption
    GPIOs 30 GPIO + 6 ANI
    封装类型 QFN, 40-pin
    封装(mm) 6.0 x 6.0
    RoHS Yes
    Lead Free Yes
    Halogen Free Yes
    ITAR Restricted No
    ECCN EAR99

    QPG6095 Software Development Kit (SDK)

    QPG6095 SDK

    Key Features

    • Enables customers to build innovative and new software applications using the Qorvo QPG6095 Zigbee / Thread / Bluetooth® Low Energy Smart Home Communications Controller
    • Flexible peripheral configurations to emulate various kinds of end products
    • Zigbee Compliant Platform - QPG6095
    • Zigbee Certified Product
    • Bluetooth 5.0 qualified for Low Energy - QPG6095
    • Thread Certified Component - QPG6095

    zigbee certified platform

    zigbee certified product

     

    Download kit information
    Please contact us to receive the SDK

    bluetooth

    thread

    我们随时提供帮助