QPA4003
26.5 – 29.5 GHz 5 W GaN Power Amplifier
关键性能
- Frequency Range: 26.5 – 29.5 GHz
- PSAT (PIN = 16 dBm): 37 dBm
- PAE (PIN = 16 dBm): 22 %
- Power Gain (PIN = 16 dBm): 22 dB
- Small Signal Gain: 29 dB
- IMD3 (POUT = 31 dBm/tone): −33 dBc
- Bias: VD = 20 V, IDQ = 580 mA
- Package Dimensions: 5.0 x 5.0 x 1.621 mm
Qorvo's QPA4003 is a Ka-band power amplifier fabricated on Qorvo's 0.15um GaN on SiC process (QGaN15). Operating from 26.5 to 29.5 GHz, it achieves 1.25 W linear power with lower than −33 dBc intermodulation distortion products and 29 dB small signal gain. Saturated output power is greater than 37 dBm (5 W) with an associated power-added efficiency of 22 %.
The QPA4003 is packaged in a 5.0 x 5.0 mm laminate package. It can support a variety of operating conditions to best support system requirements. With good thermal properties, it can support a range of bias voltages.
The QPA4003 is fully matched to 50 ohms. RF I/O power are shorted to ground. The QPA4003 is ideally suited to support satellite communications and 5G infrastructure.
特别应用
- 5G Infrastructure
- Satellite Communications
| 频率最小值(GHz) | 26.5 |
| 频率最大值(GHz) | 29.5 |
| Psat(dBm) | 37 |
| 增益(dB) | 29 |
| PAE(%) | 22 |
| 电压(V) | 20 |
| 电流(mA) | 580 |
| 封装类型 | Laminate |
| 封装(mm) | 5.0 x 5.0 |
| RoHS | Yes |
| Lead Free | Yes |
| Halogen Free | Yes |
| ITAR Restricted | No |
| ECCN | 3A001.B.2.C |