ACT85611
Power Loss Protection Power Management Unit with integrated high current Bucks and Boost converters and LDO for enterprise SSDs application
关键性能
- Monolithic design for both PLP and PMIC in one chip
-
All eFuse/Bucks/Boosts FETs are integrated
-
2.7 V ~14 V Operating Input with 20 V Max Blocking
-
Programmable Input UV/OV/OC/SC & Inrush Control
-
5 V ~ 31 V Boost Cap Charger
-
31 V / 8 A Synchronous High-Efficiency Buck
-
3 x 4 A (6 A Peak) + 1x 2 A (3 A Peak) Bucks
-
1 x 12 V/1 A Boost + 1 x 100 mA Buck VCC + 1 x 300/50 mA LDO
-
7 programmable GPIOs
-
8-channels 12-bit ADC
-
Storage capacitance check and read
The ACT85611 is a highly integrated, highly configurable multiple output power management IC (PMIC) with built-in power loss protection (PLP). Four high-efficiency Buck regulators can supply 3 x 4 A and 1 x 2 A output current. The output voltage can go as low as 0.6 V. In addition, there is a 12 V boost converter plus powers the internal gate drivers for maximum efficiency.
The power loss protection (PLP) provides backup storage power in the event of an input power failure. A built-in Boost converter provides high-voltage energy storage to minimize storage capacitor size requirements. The built-in Buck converter regulates the storage voltage to a fixed output voltage during Supplement mode. The ACT85611 contains internal, back-to-back eFuse FETs to provide bidirectional input-to-output isolation. The IC also provides hot-swap and inrush current control.
The ACT85611 features a programmable storage capacitor voltage to optimize the storage capacitor sizing and system run time. The internal ADC and health monitoring
provide an extra layer of protection and improve system reliability and early capacitor failure notification. It checks the storage capacitor's health and notifies the
user when the energy in the storage caps is not sufficient for backup power. The built-in ADC also measures the input voltage, output voltage, storage voltage, eFuse current, and die temperature. The built-in synchronous Buck converter maximizes energy transfer from the storage caps to the system.
特别应用
-
Solid State Drives
-
Industrial Applications
-
Backup Power
-
Hot Plug / Hot Swap Devies
| Min Input Voltage(V) | 2.7 |
| 最大输入电压(V) | 14 |
| eFuse Abs 最大额定电压(V) | 20 |
| eFuse FET RDS (导通)(mohm) | 17 |
| 存储电容电压(V) | 31 |
| 最大输入电流(A) | 10 |
| 降压 FET RDS (导通)(mohm) | 60, 35 |
| 降压电流(A) | 8 |
| 降压工作频率(kHz) | 562, 1125, 1500, 2250 |
| 隔直 FET(mohm) | 30 |
| 接口 | I2C |
| 自动健康监测 | Yes |
| ADC | 12 bit, 8 channels |
| 封装类型 | 52L - QFN |
| 封装(mm) | 6.0 x 6.0 |
| RoHS | Yes |
| Lead Free | Yes |
| Halogen Free | Yes |
| ITAR Restricted | No |
| ECCN | EAR99 |
ACT85611 Evaluation Kit
The Evaluation Tool Users Guide describes the characteristics and operation of the Qorvo ACT85611 evaluation kit (EVK). It provides setup and operation instructions, schematic, layout, BOM, and test data.
To communicate with the EVK a USB Dongle and a Graphical User Interface (GUI) are provided.
This EVK demonstrates the ACT85611 power loss protection power management unit.
ACT85611 GUI
The ACT85611 EVK Graphical User Interface (GUI) is packaged in a ZIP file that includes the software and all necessary drivers to communicate with the ACT85611 Evaluation Tool, as well as all descriptions how to use the tool.