TQL9093
600 - 4200 MHz Ultra Low Noise, Flat Gain Low Noise Amplifier
关键性能
- 0.6 - 4.2 GHz frequency range
- 2dB gain flatness across 1.5-4 GHz
- 0.7 dB NF at 2.6 GHz
- 20 dB gain at 2.6 or 4 GHz
- High input power ruggedness, 33 dBm CW
- Bias adjustable for IP3 optimization
- 1.8V TTL logic compatible for shutdown control
- Maintains OFF state with high input power
- Class 1B HBM ESD rating
- Unconditionally stable
- Integrated on-chip matching, 50 ohm in/out
Qorvo's TQL9093 is a flat-gain, high-linearity, ultra-low noise amplifier in a small 2 x 2 mm surface-mount package. The LNA provides a gain flatness of 2 dB (peak-to-peak) over a wide bandwidth from 1.5 to 4 GHz. At 2.6 GHz, the amplifier typically provides 20 dB gain, +41.5 dBm OIP3 at a 120 mA bias setting, and 0.7 dB noise figure. The LNA can be biased from a single positive supply ranging from 3.3 to 5 volts. The device is housed in a green/RoHS-compliant industry-standard 2 x 2 mm package.
The TQL9093 is internally matched using a high performance E-pHEMT process and only requires five external components for operation from a single positive supply: an external RF choke and blocking/bypass capacitors and a bias resistor going to pin 1. This LNA integrates a shut-down biasing capability to allow for operation in TDD applications.
The TQL9093 is optimized for linear performance across the 1.5 to 4.2 GHz frequency band but can operate down to 600 MHz.
特别应用
- Defense Communications
- Distributed Antenna Systems (DAS)
- FDD / TDD
- Mobile Infrastructure
- Repeaters
| 频率最小值(GHz) | 0.6 |
| 频率最大值(GHz) | 4.2 |
| 增益(dB) | 20 |
| NF(dB) | 0.67 |
| OP1dB(dBm) | 21.7 |
| OIP3(dBm) | 41.5 |
| 电压(V) | 5 |
| 电流(mA) | 120 |
| 封装类型 | DFN |
| 封装(mm) | 2 x 2 x 0.85 |
| RoHS | Yes |
| Lead Free | Yes |
| Halogen Free | Yes |
| ITAR Restricted | No |
| ECCN | 5A991.B |
这个产品出现在以下的应用框图中: