TQP4M9071
DC - 4 GHz Parallel Controlled, High Linearity Digital Step Attenuator, 6 Bit, 0.5 dB Steps, Packaged
关键性能
- DC to 4 GHz
- 0.5 dB LSB steps to 31.5 dB
- +57 dBm Input IP3
- 1.7 dB insertion loss @ 2.2 GHz
- TTL / CMOS compatible parallel control interface
- No requirement for external bypass capacitors for operation above 700 MHz
- 50 Ohm impedance
- +3.3 to +5 V supply voltage
Qorvo's TQP4M9071 is a high linearity, low insertion loss, 6-bit, 31.5 dB digital step attenuator (DSA) operating over the DC to 4 GHz frequency range. The digital step attenuator uses a single positive 3.3 V or 5 V supply and has a parallel control interface for changing attenuation states. This product maintains high attenuation accuracy over frequency and temperature. No external matching components are needed for the DSA. The product has an added feature of not requiring external AC ground capacitors for operation above 700 MHz.
The part is available in a standard lead-free / green / RoHS-compliant 24-pin 4 x 4 mm QFN package. The TQP4M9072 is also available from Qorvo as a footprint and pin compatible DSA equivalent with a serial control interface.
特别应用
- 2G / 3G / 4G Wireless Infrastructure
- Base Stations
- Fixed Wireless
- General Purpose Wireless
- Repeaters
- Test Equipment and Sensors
| 频率最小值(MHz) | 0 |
| 频率最大值(MHz) | 4,000 |
| 插入损耗(dB) | 1.6 |
| 衰减范围(dB) | 31.5 |
| IP0.1dB(dBm) | 30 |
| IIP3(dBm) | 57 |
| 接口 | Parallel |
| 位 | 6 |
| 步长(dB) | 0.5 |
| 电压(V) | 5 |
| 封装类型 | QFN, 24-pin |
| 封装(mm) | 4.0 x 4.0 x 0.85 |
| RoHS | Yes |
| Lead Free | Yes |
| Halogen Free | Yes |
| ITAR Restricted | No |
| ECCN | EAR99 |