TQM879006A
1400 - 2700 MHz, 0.25 Watt Serial Controlled Digital Variable Gain Amplifier, 6-Bit, 0.5 dB Steps, Packaged
End of Life announced January 14, 2022 (PCN 22-0006).
Last Time Buy: January 9, 2023
Recommended replacement for new designs: TQC9305
Contact your local sales representative for assistance.
Qorvo's TQM879006A is a digital variable gain amplifier (DVGA) featuring high linearity over the entire gain control range. The amplifier module features the integration of a low noise amplifier gain block, a digital-step attenuator (DSA), along with a high linearity 1/4 W amplifier. The module has the added features of integrating all matching components with bias chokes and blocking capacitors in a compact 6x6 mm leadless SMT package. The internal DSA offers 0.5 dB step, 6-bit, and 31.5 dB range and has a serial controlled interface. The DVGA operations over the entire 1.4 - 2.7 GHz frequency range with +43 dBm Output IP3 and +24.5 dBm P1dB while operating from single +5V supply. The amplifier also has a very low 1.5 dB Noise Figure (at maximum gain) allowing it to be an ideal DVGA for both receiver and transmitter applications. The device is ideal for 3G/4G base station transceivers or repeater applications. The TQM879006A is pin and package compatible to the TQM829007 0.6 - 1.0 GHz DVGA.
特别应用
- 3G / 4G Wireless Infrastructure
- High Power Amplifiers
- Repeaters
- Point-to-Point Radio
- VSAT
- LTE
- WCDMA
- TDD
- FDD
| 频率最小值(MHz) | 1,400 |
| 频率最大值(MHz) | 2,700 |
| 衰减范围(dB) | 31.5 |
| 0 dB 衰减时的增益(dB) | 31.7 |
| OP1dB(dBm) | 24.5 |
| OIP3(dBm) | 43 |
| 位 | 6 |
| NF(dB) | 1.5 |
| 电压(V) | 5 |
| 电流(mA) | 174 |
| 封装类型 | QFN, 28-pin |
| 封装(mm) | 6.0 x 6.0 x 1.0 |
| RoHS | Yes |
| Lead Free | No |
| Halogen Free | Yes |
| ITAR Restricted | No |
| ECCN | 5A991.B |