QPF4207
2.4 GHz Wi-Fi 7 High Power Non-linear Front End Module
关键性能
- PSAT = +32 dBm
- Corrected DEVM1
- POUT = +20 dBm MCS13 EHT20 -47 dB Dynamic EVM
- POUT = +22 dBm MCS11 HE20 -43 dB Dynamic EVM
- POUT = +25 dBm MCS8 VHT20 -35 dB Dynamic EVM
- POUT = +26 dBm MCS7 HT20 -30 dB Dynamic EVM
- POUT = +28 dBm MCS0 HT20 Spectral Mask Compliance
- DC Power = 1.75 W at +27 dBm
- 33 dB Tx Gain
- 1.9 / 3 dB Noise Figure
- >15 dB 5 - 7 GHz Rejection on Rx Path
- Integrated RF Coupler & DC Logarithmic Power Detector
The Qorvo QPF4207 is an integrated front end module (FEM) designed for Wi-Fi 7 (802.11be) systems. The small form factor and integrated matching minimizes layout area in the application.
Performance is focused on optimizing the PA for a 5 V supply voltage that minimizes power consumption to allow for systems that use digital pre-distortion to achieve the highest linear output power and leading edge throughput for the RF chain.
A coupler with RF output is integrated for DPD feedback training. Options for alternate routing of the feedback are included with low loss. For power control a broadrange, constant slope voltage logarithmic power detector is provided for application feedback. The module includes a state to turn on and off, which could reduce bill of material or give an option to reduce current draw.
The QPF4207 integrates a 2.4 GHz power amplifier (PA), single pole two throw switch (SP2T) and bypassable low noise amplifier (LNA) into a single device.
特别应用
- Access Points
- Wireless Routers
- Residential Gateways
- Customer Premise Equipment
- Internet of Things
| 频率最小值(GHz) | 2.412 |
| 频率最大值(GHz) | 2.484 |
| 功能性 | NLPA, Switch, LNA, CPLR |
| Wi-Fi 标准 | Wi-Fi 7 |
| Vcc(V) | 5 |
| 11n Pout(dBm) | 25 |
| 11n EVM(%) | -30 |
| 11n 电流(mA) | 300 |
| Tx 增益(dB) | 33 |
| OP1dB(dBm) | 32 |
| Rx 增益(dB) | 14 |
| NF(dB) | 1.9 |
| 旁路损耗(dB) | 3 |
| Rx 电流(mA) | 14 |
| 封装类型 | Laminate |
| 封装(mm) | 5.0 x 3.0 |
| RoHS | Yes |
| Lead Free | Yes |
| Halogen Free | Yes |
| ITAR Restricted | No |
| ECCN | 5A991G |