RFDA3016
3000 - 3800 MHz Serial Controlled Digital Variable Gain Amplifier, 6-Bit, 0.5 dB Steps
中止的 >
End of Life announced January 4, 2019 (PCN 18-0134).
Last Time Buy June 23, 2019.
Contact a sales representative for assistance.
关键性能
- Frequency Range 3000MHz to 3800MHz
- Full Internal Matching and No External Bias Inductors
- 6-Bit Digital Step Attenuator
- SPI Serial Control Programming
- Max Gain = 38dB at 3500MHz
- Gain Control Range = 31.5dB (0.5dB Step Size)
- High OIP3/P1dB = +40.5/30dBm Type
- Single +5V Supply
- Small 28-Pin, 6.0mm x 6.0mm, MCM
- Power-up Programming
Qorvo's RFDA3016 is a digital controlled variable gain amplifier featuring high linearity over the entire gain control range with noise figure less than 5.0dB in its maximum gain state. The gain of the 6-bit digital step attenuator is programmed with a serial mode control interface (SPI). The RFDA3016 is packaged in a small 6.0mm x 6.0mm leadless laminate MCM, which contains plated through thermal vias for ultra-low thermal resistance. This module is easy to use with no external matching components required.
| 频率最小值(MHz) | 3,000 |
| 频率最大值(MHz) | 3,800 |
| 衰减范围(dB) | 31.5 |
| 0 dB 衰减时的增益(dB) | 38 |
| OP1dB(dBm) | 30.4 |
| OIP3(dBm) | 40.5 |
| 位 | 6 |
| NF(dB) | 4.8 |
| 电压(V) | 5 |
| 电流(mA) | 250 |
| 封装类型 | MCM |
| 封装(mm) | 6 x 6 |
| ECCN | 5A991.G |