QPC6713Q
50 - 6000 MHz Serial Controlled Digital Step Attenuator for Automotive, 7-Bit, 0.25 dB Steps
产出 >
Contact your local sales representative for more information.
关键性能
- Tested in accordance with AEC-Q100 Grade 2
- 7-Bit, 31.75 dB Range, 0.25 dB Step
- Patented Circuit Architecture
- Overshoot-free Transient Switching Performance
- Frequency Range 50 MHz to 6000 MHz
- High Linearity, IIP3 > +55 dBm
- Serial Control Interface
- Fast Switching Speed, 50 nsec Typical
- Serial Addressable Supports Up to Eight Addresses
- Single Supply +3 V to +5 V Operation
- RF Pins Have No DC Voltage. Can be DC Grounded Externally
- Power-up Default Setting Is Maximum Attenuation
Qorvo's QPC6713Q is a 7-bit digital step attenuator (DSA) that features high linearity over the entire 31.75 dB gain control range in 0.25 dB steps. The QPC6713Q uses a serial control interface and has a low insertion loss of 1.7 dB at 2 GHz. The patented circuit architecture provides overshoot-free transient switching performance using a single +3 V to +5 V power supply. External address pins allow up to eight DSAs to be controlled on a single bus.
The QPC6713Q is available in a standard lead-free, RoHS-compliant 16 pad 3 x3 mm QFN package.
特别应用
- 2G through 4G Base Stations
- Point-to-Point
- Wi-Fi
- Test Equipment
| 频率最小值(MHz) | 50 |
| 频率最大值(MHz) | 6,000 |
| 插入损耗(dB) | 1.7 @ 2000 MHz, 3.3 @ 5890 MHz |
| 衰减范围(dB) | 31.75 |
| IP0.1dB(dBm) | 30 |
| IIP3(dBm) | > 55 |
| 接口 | Serial |
| 位 | 7 |
| 步长(dB) | 0.25 |
| 电压(V) | 3 to 5 |
| 封装类型 | QFN, 16 pad |
| 封装(mm) | 3.0 x 3.0 x 0.85 |
| RoHS | Yes |
| Lead Free | Yes |
| Halogen Free | Yes |
| ITAR Restricted | No |
| ECCN | 5A991G |