关键性能
- 0.05 - 2.0 GHz Operational Bandwidth
- Ultra low noise figure, 0.45 dB NF @ 0.9 GHz
- High gain, 19.8 dB Gain @ 0.9 GHz
- High linearity, +36 dBm Output IP3
- High input power ruggedness, 22 dBm CW
- Unconditionally stable
- Integrated on-chip matching, 50 ohm in/out
- Integrated active bias
- Integrated shutdown control pin
- +3V to +5V supply; does not require -Vgg
- Pin compatible with high-band TQP3M9037
- Small 2 x 2 mm package
Qorvo's TQP3M9036 is a high linearity, ultra low noise gain block amplifier in a small 2x2 mm surface-mount package. At 0.9 GHz, the amplifier typically provides 19.8 dB gain, +36 dBm OIP3, and 0.45 dB noise figure while drawing 65 mA current from a 5V supply. This amplifier does not require a negative supply for operation and can be biased from a single positive supply ranging from 3.3 to 5 volts. The device is housed in a green/RoHS-compliant industry-standard 2x2 mm package. The TQP3M9036 is internally matched using a high performance E-pHEMT process and integrates a shut-down biasing capability to allow for operation for TDD applications. The TQP3M9036 covers the 0.05-2.0 GHz frequency band and is targeted for wireless infrastructure. It is pin compatible with the low-band, 1.5-2.7 GHz TQP3M9037.
特别应用
- 3G / 4G Wireless Infrastructure
- FDD / TDD
- General Purpose Wireless
- Repeaters
- WCDMA / LTE
| 频率最小值(GHz) | 0.05 |
| 频率最大值(GHz) | 2 |
| 增益(dB) | 19.8 |
| NF(dB) | 0.45 |
| OP1dB(dBm) | 20 |
| OIP3(dBm) | 36 |
| 电压(V) | 5 |
| 电流(mA) | 68 |
| 封装类型 | DFN |
| 封装(mm) | 2 x 2 x 0.85 |
| RoHS | Yes |
| Lead Free | Yes |
| Halogen Free | Yes |
| ITAR Restricted | No |
| ECCN | 5A991.B |
这个产品出现在以下的应用框图中: