QPM2100

    2.5 - 4.0 GHz GaAs Transmit / Receive Module

    关键性能

    • Frequency Range: 2.5 - 4.0 GHz
    • RX Noise Figure: 1.2dB
    • RX Small Signal Gain: 30 dB
    • RX Output TOI: TBD dBm
    • TX Channel Insertion Loss: 1.2dB
    • RX Power at 1dB Compression: 14.5dBm
    • RX Attenuation Range: 31.5dB
    • RX Output TOI: 34 dBm
    • Channel Switching Response Tine: 15 nS
    • TX Channel Low insertion loss : 1.2dB
    • Channel Isolation : 35dB
    • Package Dimensions: 7.0 x 7.0 x 0.8 mm

    1 Performance is typical at room temperature.

    The QPM2100 is a GaAs multi chip module (MCM) designed for S-Band radar applications within the 2.5-4.0 GHz range. The device consists of a T/R switch, a transmit path which is a low loss pass through, and a receive path  consists of a low-noise amplifier, a digital attenuator and a driver amplifier. The receive path offers 30 dB of small signal gain and 1.2 dB noise figure. It includes a 6 bit digital step attenuator (DSA) with 31.5 dB gain control range. It can deliver 14.5 dBm of power at P1dB with 34 dBm of output TOI. All functional MMIC blocks can be enabled or DC powered off with internal control circuitry. All control signals use CMOS compatible logic. The response time of signal control is less than 15 nS.

    The QPM2100 chips are fabricated on Qorvo's GaAs 0.25um process. The 7 x 7 OVM QFN surface mount package, coupled with a proprietary die-attach process, allows the QPM2100 to perform well at extreme temperature ambient. Its compact size supports tight lattice spacing requirements needed for S - Band phased array radar applications.

    特别应用

      • Electronic Warfare
      • Communications
      • Commercial and Military Radar
    频率最小值(GHz) 2.5
    频率最大值(GHz) 4.0
    Tx 增益(dB) -1.2
    Tx Psat(W) 15.5
    Rx 增益(dB) 30
    Rx NF(dB) 1.2
    Rx 电压(V) 3.3
    RoHS Yes
    Lead Free Yes
    Halogen Free Yes
    ITAR Restricted No

    我们随时提供帮助