QPF4659
6 GHz Wi-Fi 7 High Power Front End Module
关键性能
- POUT = +13 dBm MCS13 EHT320 -47 dB Dynamic EVM
- POUT = +20 dBm MCS9 EHT320 -35 dB Dynamic EVM
- POUT = +21 dBm MCS7 EHT320 -30 dB Dynamic EVM
- POUT = +24 dBm MCS9 VHT40 -35 dB Dynamic EVM
- POUT = +27 dBm MCS0 HT20 Spectral Mask Compliance
- Optimized for +5 V Operation
- 32 dB Tx Gain
- 1.8 dB Noise Figure
- 16 dB Rx Gain & 7 dB Bypass Loss
- Integrated RF Coupler
- Integrated DC Logarithmic Power Detector
The Qorvo QPF4659 is an integrated front end module (FEM) designed for Wi-Fi 7 (802.11be) systems. The compact form factor and integrated matching minimizes layout area in the application.
Performance is focused on optimizing the PA for a 5V supply voltage that conserves power consumption while maintaining the highest linear output power and leading-edge throughput. This is done across a wide bandwidth enabling operation in all channels from UNII5-8 (5.9 to 7.1 GHz) Integrated die level filtering for 2nd and 3rd harmonics as well as 2.4 GHz rejection for DBDC operation are included. A coupler with RF output as well as a broad range, constant slope voltage logarithmic power detector is provided for application feedback.
The QPF4659 integrates a 6 GHz power amplifier (PA), single pole two throw switch (SP2T) and bypassable low noise amplifier (LNA) into a single device.
特别应用
- Access Points
- Wireless Routers
- Set Top Boxes
- Customer Premise Equipment
- Internet of Things
| 频率最小值(GHz) | 5.925 |
| 频率最大值(GHz) | 7.125 |
| 功能性 | PA, Switch, LNA |
| Wi-Fi 标准 | Wi-Fi 7 |
| Vcc(V) | 5 |
| 11ac Pout(dBm) | 13 |
| 11ac EVM(dB) | -47 |
| 11ac 电流(mA) | 180 |
| 11n Pout(dBm) | 18 |
| 11n EVM(dB) | -43 |
| 11n 电流(mA) | 220 |
| Tx 增益(dB) | 32 |
| OP1dB(dBm) | 31 |
| Rx 增益(dB) | 16 |
| NF(dB) | 1.8 |
| 旁路损耗(dB) | 7 |
| Rx 电流(mA) | 20 |
| 封装类型 | Laminate |
| 封装(mm) | 3.0 x 3.0 |
| RoHS | Yes |
| Lead Free | Yes |
| Halogen Free | Yes |
| ITAR Restricted | No |
| ECCN | 5A991G |