QPF4506B
5 GHz Wi-Fi Front End Module
For more information, please contact Qorvo Sales.
关键性能
- 5150 – 5925 MHz
- POUT = +16 dBm MCS11 HE80 -43 dB Dynamic EVM
- POUT = +18 dBm MCS11 HE80 -40 dB Dynamic EVM
- POUT = +20 dBm MCS9 HT80 -35 dB Dynamic EVM
- POUT = +21.5 dBm MCS7 HT80 -30 dB Dynamic EVM
- POUT = +24 dBm MCS0 HT20 Spectral Mask Compliance
- Optimized for +5 V Operation
- 32 dB Tx Gain
- 1.8 dB Noise Figure
- 14 dB Rx Gain & 6 dB Bypass Loss
- 25 dB 2.4 GHz Rejection on Rx Path
- Integrated RF Power Log Detector
The Qorvo QPF4506B is an integrated front end module (FEM) designed for Wi-Fi 802.11ax systems. The compact form factor and integrated matching minimizes layout area in the application.
Performance is focused on optimizing the PA for a 5 V supply voltage that conserves power consumption while maintaining the highest linear output power and leading edge throughput. Receive path matches the optimal technologies to maximize Rx sensitivity through noise figure performance that is consistent over a wider variety of conditions. The receive path has Integrated die level filtering for 2nd and 3rd harmonics as well as 2.4 GHz rejection for DBDC operation are included. Another key feature is the integration of a logarithmic power detector which enables power accuracy at lower powers.
The QPF4506B integrates a 5 GHz power amplifier (PA), regulator, single pole two throw switch (SP2T), bypassable low noise amplifier (LNA) and coupler into a single device.
特别应用
- Access Points
- Wireless Routers
- Residential Gateways
- Customer Premise Equipment
- Internet of Things
| 频率最小值(GHz) | 5.15 |
| 频率最大值(GHz) | 5.85 |
| Wi-Fi 标准 | Wi-Fi 6 |
| Vcc(V) | 5 |
| 11ac Pout(dBm) | 20 |
| 11ac EVM(dB) | 1.8 |
| 11n Pout(dBm) | 21.5 |
| Tx 增益(dB) | 30 |
| Rx 增益(dB) | 14 |
| NF(dB) | 1.9 |
| 旁路损耗(dB) | 6 |
| Rx 电流(mA) | 36 |
| 封装类型 | Laminate |
| 封装(mm) | 3.0 x 3.0 |
| RoHS | Yes |
| Lead Free | Yes |
| Halogen Free | Yes |
| ITAR Restricted | No |