2.4 GHz Wi-Fi 6 Front End Module


    • POUT = +14 dBm MCS11 HE40 -43 dB Dynamic EVM
    • POUT = +17 dBm MCS9 VHT40 -35 dB Dynamic EVM
    • POUT = +18 dBm MCS7 HT20/40 -30 dB Dynamic EVM
    • POUT = +21 dBm MCS0 HT20 Spectral Mask Compliance
    • 0.5 W Power Consumption at POUT = +18 dBm
    • Optimized for +3.3 V Operation
    • 33 dB Tx Gain
    • 2.1 dB Noise Figure
    • 15 dB Rx Gain & 7 dB Bypass Loss
    • 15 dB 5 GHz Rejection on Rx Path
    • Integrated DC Power Detector

    The Qorvo® QPF4230 is an integrated front end module (FEM) designed for Wi-Fi 6 (802.11ax) systems. The compact form factor and integrated matching minimizes layout area in the application.

    Performance is focused on optimizing the PA for a 3.3V supply voltage that conserves power consumption while maintaining the highest linear output power and leading edge throughput. Receive path matches the optimal technologies to maximize Rx sensitivity through noise figure performance that is consistent over a wider variety of conditions. Integrated die level filtering for 2nd and 3rd harmonics as well as 5 GHz rejection for DBDC operation are included. For power control feedback, a DC power detector which has voltage output has been integrated.

    The QPF4230 integrates a 2.4GHz power amplifier (PA), regulator, single pole three throw switch (SP3T), low noise amplifier (LNA) and coupler into a single device.


      • Access Points
      • Wireless Routers
      • Client Equipment
      • Customer Premise Equipment
      • Internet of Things
    频率最小值(GHz) 2.412
    频率最大值(GHz) 2.484
    功能性 PA, Switch, LNA
    Wi-Fi 标准 Wi-Fi 6
    Vcc(V) 3.3
    11ac Pout(dBm) 17
    11ac EVM(%) -35
    11ac 电流(mA) 145
    11n Pout(dBm) 18
    11n EVM(%) -30
    11n 电流(mA) 155
    Tx 增益(dB) 33
    OP1dB(dBm) 27
    Rx 增益(dB) 15
    NF(dB) 2.1
    旁路损耗(dB) 6
    Rx 电流(mA) 30
    封装类型 Laminate
    封装(mm) 3.0 x 3.0
    RoHS Yes
    Lead Free Yes
    Halogen Free Yes
    ITAR Restricted No
    ECCN 5A991G