QPF4219
2.4 GHz 802.11ac Wi-Fi Front End Module
关键性能
- 2400 – 2500 MHz
- POUT = +24.5 dBm MCS8/9 VHT40 -35 dB Dynamic EVM
- POUT = +25.5 dBm MCS7 HT20/40 -30 dB Dynamic EVM
- POUT = +28 dBm 802.11b Spectral Mask Compliance
- Optimized for +5 V Operation
- 33 dB Tx Gain
- 1.8 dB Noise Figure
- 16 dB Rx Gain & 7 dB Bypass Loss
- 19 dB 5 GHz Rejection on Rx Path
The Qorvo QPF4219 is an integrated front end module (FEM) designed for Wi-Fi 802.11ac systems. The compact form factor and integrated matching minimizes layout area in the application.
Performance is focused on optimizing the PA for a 5V supply voltage that conserves power consumption while maintaining the highest linear output power and leading edge throughput. Receive path matches the optimal technologies to maximize Rx sensitivity through noise figure performance that is consistent over a wider variety of conditions.
The receive path is pinned out so external filtering can be added in the optimal position. Integrated die level filtering for 2nd and 3rd harmonics as well as 5 GHz rejection for DBDC operation are included.
The QPF4219 integrates a 2.4 GHz power amplifier (PA), regulator, single pole two throw switch (SP2T), bypassable low noise amplifier (LNA) and DC power detector into a single device.
特别应用
- Access Points
- Wireless Routers
- Client Equipment
- Customer Premise Equipment
- Internet of Things
| 频率最小值(GHz) | 2.412 |
| 频率最大值(GHz) | 2.484 |
| 功能性 | PA+SW+LNA |
| Wi-Fi 标准 | b-ac |
| Vcc(V) | 5 |
| 11ac Pout(dBm) | 24.5 |
| 11ac EVM(%) | -35 |
| 11ac 电流(mA) | 360 |
| 11n Pout(dBm) | 25.5 |
| 11n EVM(%) | -30 |
| 11n 电流(mA) | 380 |
| Tx 增益(dB) | 33 |
| OP1dB(dBm) | 32.5 |
| Rx 增益(dB) | 16 |
| NF(dB) | 1.8 |
| 旁路损耗(dB) | 7 |
| Rx 电流(mA) | 18 |
| 封装类型 | Laminate |
| 封装(mm) | 5.0 x 3.0 |
| RoHS | Yes |
| Lead Free | Yes |
| Halogen Free | Yes |
| ITAR Restricted | No |
| ECCN | 5A991G |