关键性能
- 4 to 5.5 V input with 20 V protection
- 0.8 A linear charger
- 4 high efficiency DC/DC converters
- 3 LDOs
- 3 load switches
- 4 configurable GPIOs
- I2C serial interface
- Reset and power sequencing
- Minimal external components
- 2 low power modes
Qorvo's ACT81460 is a low power PMIC (Power Management Integrated Circuit) that is specifically designed for battery operated systems and is suitable for a variety of processor applications. It features very low standby current that prolongs battery life between charges, especially in applications requiring long standby or low power mode durations. It is a highly efficient PMIC that also enhances battery run-time during normal operating modes. The number of regulators that can be turned off or left on during low power modes is configurable and offers flexibility to optimize system efficiency.
The IC includes four DC/DC converters with integrated power FETs, three low-dropout regulators (LDOs), and three load switches. Two of the DC/DC converters are step-down buck regulators, one is a step up/down buck-boost regulator and the fourth is a high voltage step-up boost regulator capable of providing up to 20 V. Each regulator can be configured for a wide range of output voltages through the I2C interface.
ACT81460 is available in a 3.3 x 3.3 mm 49 ball WLCSP package with optimized pinout for easy PCB routing.
特别应用
- Consumer or medical wearables
- Battery operated personal devices
- IOT Modules
- Cameras & DVRs
| 应用处理器 | General purpose / wearable and IoT processors |
| 电池充电器 | ActivePath™ |
| Regulated Outputs | 7 |
| Min Input Voltage(V) | 2.7 |
| 最大输入电压(V) | 5.5 |
| Pin Count | 49 |
| Operating Junction Temperature(C) | -40 to 150 |
| 降压转换器 | 2 |
| 可配置为负载开关的降压器件 | 0 |
| 升压转换器 | 1 |
| 升降压转换器 | 1 |
| LDO 稳压器 | 3 |
| 可配置为负载开关的 LDO | 3 |
| 接口 | I2C |
| 封装类型 | CSP, 49-pin |
| 封装(mm) | 3.3 x 3.3 |
| RoHS | Yes |
| Lead Free | Yes |
| Halogen Free | Yes |
| ITAR Restricted | No |
| ECCN | EAR99 |
ACT81460EVK1-101 Evaluation Kit
ACT81460EVK1-101 Evaluation Tool User's Guide
The Evaluation Tool Users Guide describes the characteristics and operation of the Qorvo ACT81460EVK1-101 evaluation kit (EVK). It provides setup and operation instructions, schematic, layout, BOM, and test data.
To communicate with the EVK a USB Dongle and a Graphical User Interface (GUI) is provided.
This EVK demonstrates the ACT81460 ActivePMU power management IC.
ACT81460 GUI
The ACT81460EVK1-101 Graphical User Interface (GUI) is packaged in a ZIP file that includes the software and all necessary drivers to communicate with the ACT81460EVK1 Evaluation Tool, as well as all descriptions how to use the tool.